This custom ratchet strap is 3 feet long with two locking end hooks. This strap passes through the front wheel and hooks onto the two welded loops on the cross bar of the Wheeldock. The ratchet is offset so only the nylon strap makes contact with your wheel. Using this strap adds a margin of safety and doesn’t require compressing your front suspension. This safety strap is a nice addition to the Wheeldock chock.

The stealth plate kit consistes of two 4 inch square plates with heavy 1/2 inch nuts welded in the centers to secure the stand to the trailer, when the trailer floor might need added support. The kit comes with 2 plates and 8 wood screws for mounting the plates to the underside of trailer and two 1/2 inch bolts for mounting either the unit or the optional transport bar from the top side.

Wheeldock offers a quick detach mounting bar which bolts down to a trailer floor or truck bed, using two mounting (1/2 inch) bolts. This bar features a welded "Square Socket" on the left end and a socket and pin on the right end to lock the stand in place. This system prevents rotation or lifting of the wheel chock under extreme maneuvers. The stand slips into the bar ends and is locked in place by a single 1/2 inch cross pin and clip on the right side. We also provide a hole for a padlock that will lock the Wheeldock chock into the bar and protect against theft when your chock is left on an open trailer.

Kits can be installed by simply drilling a hole through the floor wherever the tie-down eyehooks need to be located to suit your requirements. Eight wood screws come with each kit to secure the plates in place. Two bolts are supplied to mount to standard trailer floor decking. Once plates are mounted there is no further work to be done under the trailer. The kits are designed to simply remove surface mounted hardware leaving a smooth, clear floor space. Comes with two 4" plates with 1/2" nuts permanently mounted.