Install In 10 Minutes Or Less!
Available
for the Harley-Davidson touring models only. Available in three
heights for stock suspensions, lowered rear suspension and lowered front and
rear suspensions.
Model
CS-1-C - Center Stand for
STOCK Suspensions - Standard Height Model
This model EZ-UP Center stand fits the standard height suspensions on 1989 and
later Harley-Davidson touring motorcycles. This is the center stand needed for
all FL touring bikes which have the bowtie brace welded between the frame rails
directly below the transmission.
NOTE: The length of standard height rear shocks are
12-3/4 inches. Measure the mounting bolts from center-to-center to check this
dimension.
- Limited lifetime warranty
- Mounts to the frame with two
bolts in less than five minutes with a 3/4 inch wrench
- EZ-OFF by simply placing the
bike in gear and driving off
- No frame or bike modification
required
- Maintenance free stand with
I-Glide self lubricating bushings at the pivot locations
-
Made in the USA
NOTE: Does not work if True-Track is installed. |
