- per page
These custom 44 mag emblems are milled from billet aluminum and inlayed with 6 real 44 mag shells. The emblems come in CHROME finish and BRASS shells.
- Available in Brass or Nickel
The derby cover kits contain 3 or 5 44-magnum bolt caps and the required socket head bolts which replace the stock round button head bolts used by Harley on their derby covers.
Just replace one bolt at a time and then press the 44 mag shells over the new bolt heads.
Just replace one bolt at a time and then press the 44 mag shells over the new bolt heads.
- Available in Brass or Nickel
These kits contain 4 shell covers and 4 stainless steel 1/4 inch socket head bolts to replace the stock round head bolts.
- Available in Brass or Nickel
The
bolt cap kit contains Four 44 magnum bolt caps & 4 replacement
socket head bolts to replace the stock round head bolts on Harley-Davidson switch housings.
- DOES NOT FIT SPORTSTERS
- Includes 2 Caps
- Available in Brass or Nickel
These decorative caps are a GREAT alternative to those plain plastic hot toppers to cover the 1/4 inch Allen head bolts used on the primary crankcase, transmission, cam housing, and any other place the 1/4 inch socket head bolts are used.
- Available in 4, 9, or 16 Caps
- Brass or Nickel
These custom "outlaw" gas caps are made from billet aluminum. They contain six flush mounted 44 magnum shells arranged to look like a loaded cylinder of a 44 magnum pistol.
- Available in Left Hand Non-Vented or Right Hand Vented
- Brass or Nickel
These custom "outlaw" point covers are made from billet aluminum and come in a variety of finishes, and any cover can be made with either brass or nickel shells. These covers fit ALL EVOs (horizontal or vertical mount) & the new 88’s).The point covers come with a special adapter plate that requires only one center mounting hole in the covers versus the 2 mounting holes on the EVOs and the 5 mounting holes on the new 88s.
- Available in Brass or Nickel
These custom "outlaw" point covers are made from billet aluminum and come in a variety of finishes, and any cover can be made with either brass or nickel shells. These covers fit ALL Twin Cam's (horizontal or vertical mount) & the new 96’s).The point covers come with a special adapter plate that requires only one center mounting hole in the covers versus the 2 mounting holes on the Twin Cam and the 5 mounting holes on the new 88s.
- Available in Brass or Nickel
These S&W 500 bullet shells (largest handgun made), fit all Harley single and dual handle bar clamps with 5/16 socket head bolts. The bolt caps are 3 tenths of an inch high and come in BRASS. The shell caps are secured to the bolt heads using a drop of silicone adhesive.
- Available in Brass or Nickel
These unique valve stem caps are made from actual 44 magnum shells and come in nickel or brass finish. These decorative caps are just over 0.5 inches in length and will work on any standard valve stem (rubber, chrome, or fully threaded stems).
- Includes 2 Caps
- Available in Brass or Nickel
These 44 Mag valve stem covers are 1/2 longer than our caps so they cover the whole valve stem.
- Includes 2 Caps
- Available in Brass or Nickel
Give your license plate some ATTITUDE with these decorative 44 Magnum bolts and bullet nut covers. They are crafted from actual Starline 44 magnum shells and silver tip hollow point bullets.
- Includes 4 Nuts and Bolts
- Available in Brass or Nickel
The
windshield cross bar kit contains five 44 magnum bolts, (3, 5/8 inch
long bolts & 2, 3/4 inch long bolts), plus 5 decorative stainless
steel acorn nuts and mounting instructions. (The 2 longer 3/4 -inch bolts are used where the windshield brackets cross).
- Available in Brass or Nickel
The
full windshield bracket kit contains 9 bolts. (7, 5/8 inch long bolts
& 2 3/4 inch long bolts), plus 9 decorative stainless steel acorn
nuts, and mounting instructions. (The 2 longer 3/4 - inch bolts are used where the windshield brackets cross).
- Available in Brass or Nickel
- per page
